shutdown(8)                                                                                                                        shutdown(8)


       shutdown - bring the system down


       shutdown [OPTION]...  TIME [MESSAGE]


       shutdown arranges for the system to be brought down in a safe way.  All logged-in users are notified that the system is going down and,
       within the last five minutes of TIME, new logins are prevented.

       TIME may have different formats, the most common is simply the word 'now' which will bring the system down  immediately.   Other  valid
       formats are +m, where m is the number of minutes to wait until shutting down and hh:mm which specifies the time on the 24hr clock.

       Once TIME has elapsed, shutdown sends a request to the init(8) daemon to bring the system down into the appropriate runlevel.

       This  is  performed  by emitting the runlevel(7) event, which includes the new runlevel in the RUNLEVEL environment variable as well as
       the previous runlevel (obtained from the environment or from  /var/run/utmp)  in  the  PREVLEVEL  variable.   An  additional  INIT_HALT
       variable may be set, this will contain the value HALT when bringing the system down for halt and POWEROFF when bringing the system down
       for power off.


       -r     Requests that the system be rebooted after it has been brought down.

       -h     Requests that the system be either halted or powered off after it has been brought down, with the choice as to which left up  to
              the system.

       -H     Requests that the system be halted after it has been brought down.

       -P     Requests that the system be powered off after it has been brought down.

       -c     Cancels a running shutdown.  TIME is not specified with this option, the first argument is MESSAGE.

       -k     Only send out the warning messages and disable logins, do not actually bring the system down.


              shutdown will read the current runlevel from this environment variable if set in preference to reading from /var/run/utmp


              Where the current runlevel will be read from; this file will also be updated with the new runlevel.

              A new runlevel record will be appended to this file for the new runlevel.


       The Upstart init(8) daemon does not keep track of runlevels itself, instead they are implemented entirely by its userspace tools.

       See runlevel(7) for more details.


       Written by Scott James Remnant <>


       Report bugs at <>


       Copyright © 2009 Canonical Ltd.
       This  is  free  software;  see  the source for copying conditions.  There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A


       runlevel(7) init(8) telinit(8) reboot(8)

Hi, Guest!

This is a manual page collection for Linux and Unix-like operating system.


  • Works with all browsers and mobile phones.
  • The HTML in this layout validates as XHTML 1.0 strict.


Search this site